For a Tennessee contractor, the workers' compensation line is two numbers working against each other, and only one of them moves at the bidding table. The first is the loss cost — the baseline rate the state sets for each class of work. The second is the experience modifier, the factor that multiplies against that baseline to reward or penalize a firm's own claims history. The first number fell again for 2026. Whether the second number helps or hurts is the part a contractor actually controls.
Start with the state's decision. The Tennessee Department of Commerce and Insurance approved a 2% decrease in voluntary-market workers' compensation loss costs for 2026, along with a 1.1% reduction in the assigned-risk rate level, effective March 1, 2026 on new and renewal policies. Commissioner Carter Lawrence signed the order in December 2025, and the department tied the reduction to falling lost-time claim frequency and more stable claims costs. It is the thirteenth consecutive year Tennessee's loss costs have declined — a remarkable run, and one that can lull a contractor into treating comp as a solved problem.
It is not solved, because the loss cost is only the starting point. Each carrier applies its own loss-cost multiplier on top of the bureau number — Tennessee publishes those multipliers by company — and then the experience modifier is applied to the result. A modifier of 1.00 represents the average firm in a class; below 1.00 is a credit that lowers the premium, and above 1.00 is a debit that raises it. The modifier is built from three years of a firm's own claims history, excluding the most recent year, and it weighs claim frequency more heavily than severity. A pattern of small, frequent claims drives the number up faster than a single large one.
For contractors, the modifier is not only a pricing factor — it is a credential. General contractors and project owners routinely set a maximum experience modifier, often at or below 1.00, as a prequalification threshold to bid. A firm whose modifier drifts above that line can find itself disqualified from work entirely, regardless of its price. That is the quiet leverage the number carries: a statewide loss-cost decrease helps every contractor equally, but the modifier is where one firm separates itself from another — on the premium and on the shortlist.
The components that move the modifier are all within a contractor's reach. Claim frequency is the first — the industry data is consistent that a disciplined safety program and genuine hazard controls reduce the small, repeated injuries that inflate the factor. Return-to-work is the second — a transitional-duty program that keeps an injured worker productive converts what would be an expensive lost-time claim into a medical-only one, and the rating formula counts only a reduced share of the medical-only portion of claims. Reserve accuracy is the third — an open claim sits in the modifier at its reserved value, so a reserve a carrier set high and never revisited can tax a contractor for years after the worker has recovered.
Payroll classification is the component contractors overlook most. The premium basis is payroll sorted into class codes, and a worker coded into a higher-rated classification than the work justifies inflates both the premium and the exposure base the modifier is measured against. An annual review of class codes, overtime handling, and the treatment of subcontractors — whose uninsured payroll can be charged back to the contractor — is often the difference between an accurate comp cost and a padded one. None of this is visible on the declarations page; it has to be audited deliberately.
This is the discipline our 4-Step Strategic Process brings to the comp line. Strategic Discovery pulls the loss runs, the modifier worksheet, and the class-code schedule into one view so the real drivers are visible. Risk Assessment tests the open reserves, the claim frequency, and the classifications against what the modifier should be if the data were clean. Solution Design builds the safety, return-to-work, and reserve-review program that bends the number down over time. Ongoing Optimization keeps the worksheet, the audit, and the claims under the contractor's control through each policy year.
A thirteen-year run of falling loss costs is good news, and it is the part of the comp bill a contractor can do nothing about. The experience modifier is the opposite — it is set entirely by the firm's own record, and it decides both what the coverage costs and which projects the contractor is allowed to pursue. Treating it as an output to be managed, rather than a verdict to be received, is where the real control over this line of coverage lives.
— Ryan Mefford, President & Risk AdvisorSources used
- Tennessee Dept. of Commerce & Insurance — Tennessee Workers' Comp Rates Decline for 13th Consecutive Year in 2026
- Tennessee Dept. of Commerce & Insurance — 2026 Loss Cost Filing Signed Order
- Business Insurance — Tennessee comp rates to see modest decline in 2026
- The Mountain Press — Tennessee Workers' Comp Rates Decline for 13th Consecutive Year in 2026
- ABC Carolinas — EMR Construction 2026: Executive Briefing for Carolinas Contractors
- Tennessee Dept. of Commerce & Insurance — Workers' Compensation Loss Cost Multiplier Listing
- Construction Business Owner — How to Lower Your Experience Modification Rate